LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System) >> Camshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Inspection

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CAMSHAFT POSITION SENSOR 
    1. Measure the resistance of the sensor.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1 - 2 Cold 1,630 to 2,740 Ω
      1 - 2 Hot 2,065 to 3,225 Ω
      Fig 1: Identifying Camshaft Position Sensor
      G05188991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: The terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F). If the result is not as specified, replace the camshaft position sensor.
scientia non olet · About LEMON Manuals