Data List/Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Read the DATA LIST according to the display on the tester.
ECM (Cruise control)
ECM (CRUISE CONTROL) REFERENCE TABLEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note VEHICLE SPD Vehicle speed / min.: 0 km/h (0 mph) max.: 200 km/h (125 mph) Actual vehicle speed - MEMORY SPD Vehicle speed / min.: 0 km/h (0 mph) max.: 200 km/h (125 mph) Actual vehicle speed stored in memory - THROTTLE Throttle operating angle / min.: 0 deg. max.: 125 deg. Actual demanded throttle angle - CRUISE CONTROL Cruise control ON: Cruise control is SET
OFF: Cruise control is UNSET- MAIN SW (MAIN) Main switch (Main CPU) ON: Main switch (Main CPU) is SET
OFF: Main switch (Main CPU) is UNSET- CCS READY M Switch ready (Main CPU) ON: Switch ready (Main CPU) is SET
OFF: Switch ready (Main CPU) is UNSET- CCS INDICATOR M Switch indicator (Main CPU) ON: Switch indicator (Main CPU) is SET
OFF: Switch indicator (Main CPU) is UNSET- CANCEL SW CANCEL switch ON: CANCEL switch is SET
OFF: CANCEL switch is UNSET- SET/COAST SW - / SET switch ON: - / SET switch is SET
OFF: - / SET switch is UNSET- RES/ACC SW + / RES switch ON: + / RES switch is SET
OFF: + / RES switch is UNSET- STP LIGHT SW M Stop light SW signal (Main CPU) ON: Brake pedal depressed
OFF: Brake pedal released- SHIFT D POS Shift D position ON: Shift is D or 4 position
OFF: Shift is except D or 4 position-