Problem Symptoms Table

HINT:

Use PROBLEM SYMPTOMS TABLE to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

PROBLEM SYMPTOMS TABLE

Symptom	Suspected area	Reference
SET not occurring or CANCEL occurring (DTC is Normal)	1. Input signal circuit	DTC P0607/54: CONTROL MODULE PERFORMANCE
	2. Vehicle speed sensor circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
	3. Stop light switch circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
	4. Park/neutral position switch circuit	DTC P0705: TRANSMISSION RANGE SENSOR CIRCUIT MALFUNCTION (PRNDL INPUT)
	5. ECM	TERMINALS OF ECM
SET not occurring or CANCEL occurring (DTC is not output)	1. Cruise control switch circuit	CRUISE CONTROL SWITCH CIRCUIT
SET not occurring or CANCEL occurring (DTC is not output)	2. ECM	TERMINALS OF ECM
Actual vehicle speed deviates above or below the set speed	1. Vehicle speed sensor circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
Actual vehicle speed deviates above or below the set speed	2. ECM	TERMINALS OF ECM
Gear shifting occurs frequently between 3rd and O/D when driving on uphill road (Hunting)	1. Vehicle speed sensor circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
	2. ECM	TERMINALS OF ECM
Cruise control not canceled, even when brake pedal is depressed	1. Stop light switch circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
	2. ECM	TERMINALS OF ECM
Cruise control not canceled, even when transmission is shifted to "N" position	1. Park/neutral position switch circuit	DTC P0705: TRANSMISSION RANGE SENSOR CIRCUIT MALFUNCTION (PRNDL INPUT)
	2. ECM	TERMINALS OF ECM
Control switch does not operate (+/SET, +/RES, CANCEL not possible)	1. Cruise control switch circuit	CRUISE CONTROL SWITCH CIRCUIT
	2. ECM	TERMINALS OF ECM
SET possible at 40 km/h (25 mph) or less, or CANCEL does not operate at 40 km/h (25 mph) or less	1. Vehicle speed sensor circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
	2. ECM	TERMINALS OF ECM
Poor response in ACCEL and RESUME modes	1. ECM	TERMINALS OF ECM
O/D does not resume, even though the road is not uphill	1. Vehicle speed sensor circuit	DTC P0500/21 VEHICLE SPEED SENSOR "A"; DTC P0503/23 VEHICLE SPEED SENSOR "A" INTERMITTENT / ERRATIC / HIGH
O/D does not resume, even though the road is not uphill	2. ECM	TERMINALS OF ECM
DTC memory is erased	1. ECM	TERMINALS OF ECM
DTC is not output, or is output when it should not be	1. Diagnosis circuit	-
DTC is not output, or is output when it should not be	2. ECM	TERMINALS OF ECM
Cruise main indicator light remains ON or fails to light up	1. Cruise control switch circuit	CRUISE CONTROL SWITCH CIRCUIT
	2. Cruise main indicator light circuit	CRUISE MAIN INDICATOR LIGHT CIRCUIT
	3. Combination meter assembly	TERMINALS OF ECU
	4. ECM	TERMINALS OF ECM
Cruise main indicator light does not light up	1. Cruise control switch circuit	CRUISE CONTROL SWITCH CIRCUIT
	2. Cruise main indicator light circuit	CRUISE MAIN INDICATOR LIGHT CIRCUIT
	3. Combination meter assembly	TERMINALS OF ECU
	4. ECM	TERMINALS OF ECM