Problem Symptoms Table
HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
PROBLEM SYMPTOMS CHART
| Symptom | Suspected area | See |
|---|---|---|
| When shift lever is in R position, rear view monitor picture is not displayed (Screen is not black). | 1. Power source circuit | POWER SOURCE CIRCUIT |
| 2. Reverse signal circuit | REVERSE SIGNAL CIRCUIT | |
| 3. AVC-LAN circuit | AVC-LAN CIRCUIT | |
| 4. Television camera ECU | - | |
| When shift lever is in R position, rear view monitor picture is not displayed (Screen is black). | 1. Display signal circuit between television camera assembly and multi-display | Display Signal Circuit between Television Camera ECU and Multidisplay |
| 2. Television camera assembly | - | |
| 3. Television camera ECU | - | |
| When shift lever is not in R position, rear view monitor picture is displayed. | 1. Reverse signal circuit | REVERSE SIGNAL CIRCUIT |
| 2. Television camera ECU | - | |
| Rear view monitor image (color, disorder of picture) is something wrong. | 1. Display signal circuit between television camera assembly and multi-display | Display Signal Circuit between Television Camera ECU and Multidisplay |
| 2. Television camera assembly | - | |
| 3. Television camera ECU | - | |
| 4. Multi-display | - |