Inspection Procedure

HINT:

• Read freeze frame data using the intelligent tester. Freeze frame data records the engine conditions when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.
• This is the repair procedure of the throttle position sensor.

1. READ OTHER DTC OUTPUT (IN ADDITION TO DTC P0121) 
   1. Connect the intelligent tester to the CAN VIM. Then connect the CAN VIM to the DLC3.
   2. Turn the ignition switch ON.
   3. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
   4. Read the DTCs.

   Result 

   RESULT CHART
   
   

   Display (DTC output)	Proceed to
   P0121	A
   P0121 and other DTCs	B

   HINT:

   If any other codes besides P0121 are output, perform the troubleshooting for those codes first.

   B:  GO TO DIAGNOSTIC TROUBLE CODE CHART 

   A: REPLACE THROTTLE BODY