TPMS Reset Procedures: Notes

NOTE: The system will need to be initialized when tires are rotated; tires are replaced with tires of different pressures; tire pressure sensor and/or tire pressure monitor ECU are replaced. See INITIALIZING TIRE PRESSURE MONITOR SYSTEM . When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized by the tire pressure monitor ECU prior to system initialization. See TIRE PRESSURE SENSOR REGISTRATION .

When the tire pressure warning light does not go off, or when it comes on during driving, check tire pressure (including spare tire) and adjust as necessary. Warning light should turn off a few minutes after air is put into a deflated tire.

NOTE: If negative battery terminal is disconnected, initialize the following system after the cable is reconnected: meter/gauge system. Refer to owner's manual or appropriate manufacturer service information.