How To Proceed With Troubleshooting

HINT:

Use these procedures to troubleshoot the power door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
   1. Interview the customer to confirm the trouble (See HOW TO PROCEED WITH TROUBLESHOOTING ).
3. PROBLEM SYMPTOMS TABLE 
   1. If the fault is not listed on the problem symptoms table, proceed to A.
   2. If the fault is listed on the problem symptoms table, proceed to B.

      B: Go to step  5

      A: Go to Next Step 

4. PERFORM TROUBLESHOOTING IN THE FOLLOWING METHOD, DEPENDING ON MALFUNCTION SYMPTOM 
   1. Terminals of ECU (See TERMINALS OF ECU  ).
   2. Operation check (See OPERATION CHECK  ).
5. ADJUSTMENT, REPAIR OR REPLACEMENT 

   NEXT: END