Diagnostic Trouble Code Chart
If a DTC is displayed during the DTC check, check the parts listed in the table below and proceed to the page given.
HINT:
- *1: Comes on MIL (Malfunction Indicator Lamp) light up
- *2: "DTC stored" mark means ECM memorizes the malfunction code if the ECM detects the DTC detection condition.
- This DTC may be output when the clutch, brake and gear components etc. inside the automatic transaxle are damaged.
AUTOMATIC TRANSAXLE SYSTEM:
DIAGNOSTIC TROUBLE CODE CHART
| DTC Code | Detection Item | Trouble Area | MIL*1 | Memory *2 |
|---|---|---|---|---|
| P0705 | Transmission Range Sensor Circuit Malfunction (PRNDL Input) |
|
Come on | DTC stored |
| P0724 | Brake Switch "B" Circuit High |
|
Come on | DTC stored |
| P0741 | Torque Converter Clutch Solenoid Performance (Shift Solenoid Valve SL) |
|
Come on | DTC stored |
| P0751 | Shift Solenoid "A" Performance (Shift Solenoid Valve S1) |
|
Come on | DTC stored |
| P0756 | Shift Solenoid "B" Performance (Shift Solenoid Valve S2) |
|
Come on | DTC stored |
| P0850 | Park / Neutral Switch Input Circuit |
|
Come on | DTC stored |
| P0973 | Shift Solenoid "A" Control Circuit Low (Shift Solenoid Valve S1) |
|
Come on | DTC stored |
| P0974 | Shift Solenoid "A" Control Circuit High (Shift Solenoid Valve S1) |
|
Come on | DTC stored |
| P0976 | Shift Solenoid "B" Control Circuit Low (Shift Solenoid Valve S2) |
|
Come on | DTC stored |
| P0977 | Shift Solenoid "B" Control Circuit High (Shift Solenoid Valve S2) |
|
Come on | DTC stored |
| P2716 | Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) |
|
Come on | DTC stored |
| P2769 | Short In Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) |
|
Come on | DTC stored |
| P2770 | Open in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) |
|
Come on | DTC stored |