Transmission Control Cable Assembly: Removal

PRECAUTION
HINT:

(See AIRBAG SYSTEM )
SEPARATE BATTERY NEGATIVE TERMINAL
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
HINT:

(See REMOVAL )
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CTR
HINT:

(See REMOVAL )
REMOVE INSTRUMENT PANEL BOX
HINT:

(See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
HINT:

(See REMOVAL )
REMOVE AIRBAG SENSOR ASSEMBLY CENTER
HINT:

(See ON-VEHICLE INSPECTION )
SEPARATE OXYGEN SENSOR CONNECTOR
1. Remove the foot rest.
2. Pull up the floor carpet.
3. Disconnect the oxygen sensor connector.
REMOVE FLOOR PANEL BRACE FRONT
1. Remove the 2 nuts and floor panel brace.
REMOVE EXHAUST PIPE ASSEMBLY FRONT
HINT:

(See REMOVAL )
REMOVE FRONT FLOOR HEAT INSULATOR NO.1
1. Remove the 3 nuts and heat insulator.
REMOVE AIR CLEANER ASSEMBLY WITH HOSE
REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
1. Remove the nut and disconnect control cable from control shaft lever.
2. Remove the clip and disconnect the control cable from the bracket.
  
  Fig 1: Identifying Transmission Control Cable Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the control cable from control cable support.
  
  Fig 2: Locating Control Cable Support
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 nuts and separate the control cable from the body.
  
  Fig 3: Locating Control Cable Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the cable end from the floor shift assembly.
  
  Fig 4: Identifying Control Cable End
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Using a screwdriver, disconnect the control cable from the shift lever plate.
  HINT:
  
  Tape up the screwdriver tip before use.
  
  Fig 5: Locating Shift Lever Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Remove the 2 bolts.
8. Pull out the control cable assembly from the body.
9. Remove the retainer from the shift cable.