Front Side Speaker: Installation

INSTALL FRONT NO. 1 SPEAKER
1. Using an air riveter or hand riveter, 3 new strike rivets to install the front No. 1 speaker to the front door panel.
  
  Fig 1: Precaution For Rivet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Install the new strike rivet in following order shown in the illustration to install the front No. 1 speaker.
  - Do not prize a riveter, as riveter is damaged, it is not tightened and the mandrel is bent.
  - Do not tilt the riveter and disconnect the rivet from the material while handling a riveter, as the materials are not tightened firmly.
  - Install the rivet while attaching materials, as they are not tightened firmly.
2. Connect the connector.
INSTALL FRONT NO. 2 SPEAKER
1. Install the front No. 2 speaker with the 2 nuts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the connector.
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (See REASSEMBLY )
INSTALL UPPER FRONT ARMREST BASE PANEL LH (w/o Power Window)
INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)
INSTALL FRONT DOOR PULL HANDLE LH