LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Fail-Safe Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail-Safe Chart

  1. FAIL-SAFE CHART 
    1. If the following conditions are detected while the cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.
      FAIL-SAFE CHART

      Vehicle Condition Auto Cancel Condition Re-operation Condition
      The CRUISE main indicator light blinks.
      • There is an open or short in the stop light switch circuit.
      • There is a problem with the vehicle speed signal.
      • There is a problem with the throttle position sensor and motor.
      		 Push the ON-OFF button of the cruise control main switch on again.
      The CRUISE main indicator light blinks.
      • There is a problem with the input circuit of the stop light switch circuit.
      • There is a problem with the cancel circuit.
      • Turn the ON-OFF button of the cruise control main switch on again.
      • Turn the ignition switch off.
      The CRUISE main indicator light goes off.
      • Vehicle speed is lower than the low speed limit (approx. 40 km/h (approx. 25 mph)) while running with the cruise control on.
      • Vehicle speed is lower than the stored speed by 16 km/h (approx. 9.9 mph) or more.
      		 Turn the ON-OFF button of the cruise control main switch on again when the driving vehicle speed is over the low speed limit.
scientia non olet · About LEMON Manuals