Inspection Procedure

CHECK IF A PROPER CD IS INSERTED
1. Make sure that the CD is an audio CD, and that it is not deformed, flawed, stained, burred, or otherwise defective.
  OK: Normal CD.
  
  HINT:
  - Translucent or uniquely-shaped CDs cannot be played.
  - CDs with adhesive paper labels should not be played.
  - For details on playable CDs, refer to the Owner's Manual.
NG: CHANGE DISC

OK : Go to next step.
CHECK THAT CD IS INSERTED PROPERLY
1. Check whether or not the CD is inserted upside down.
  OK: CD is properly inserted.
NG: SET CD PROPERLY

OK : Go to next step.
CLEANING CD
1. Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.
2. Check that the malfunction disappears.
  OK: Malfunction disappears.
  
  NOTE: Do not use a conventional record cleaner or antistatic preservative.
NG: Go to step 4

Fig 1: Cleaning Disc Surface With Soft Dry Cloth
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : END
REPLACE CD
1. Replace the CD with a normal one and check that the malfunction disappears.
  OK: Malfunction disappears.
NG: REPLACE RADIO RECEIVER

OK : END