Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK IF A PROPER CD IS INSERTED 
   1. Make sure that the CD is an audio CD and that it is not deformed, flawed, stained, burred, or otherwise defective.

      OK: Normal CD 

      HINT:

      • Translucent or uniquely-shaped CDs cannot be played.
      • CDs with adhesive paper labels should not be played.
      • Commercial audio CDs can be played.
      • For details on playable CDs, refer to the Owner's Manual.

   NG: CHANGE DISC 

   OK : Go to next step. 

2. REPLACE CD 
   1. Replace the CD with another and recheck.
      1. Replace the CD with another normal one.
      2. Clear the DTCs (See DTC CHECK / CLEAR  ).
      3. Recheck for DTCs and check if the same trouble occurs again.

         OK: Malfunction disappears. 

   NG: REPLACE RADIO RECEIVER 

   OK : END