Front Speed Sensor: Installation

1. Install the speed sensor front LH with the bolt.

   Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   NOTE: Make sure the sensor tip is clean.
   Fig 1: Locating Speed Sensor Front LH Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the sensor harness clamp with the 2 bolts "A" and "B" to the body and shock absorber.

   Torque: Bolt A 

   8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   Bolt B 

   29 N*m (296 kgf*cm, 21 ft.*lbf) 

   Fig 2: Locating Sensor Harness Clamp Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the speed sensor connector.
4. Connect the speed sensor wire harness clamp to the body.

Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

HINT:

See TEST MODE PROCEDURE 

Fig 3: Locating Speed Sensor Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002