Ignition Switch: Installation

INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
1. Install the ignition switch assembly with the 2 screws.
  
  Fig 1: Locating Ignition Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the wire harness to the steering assembly.
  
  Fig 2: Locating Wire Harness On Steering Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the unlock warning switch connector to the ignition switch assembly.
  
  Fig 3: Locating Unlock Warning Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the ignition switch connector and unlock warning switch connector.
  
  Fig 4: Locating Ignition Switch And Unlocking Warning Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING COLUMN COVER LWR
1. Install the steering column cover LWR with the 3 screws.
  
  Fig 5: Identifying Steering Column Cover LWR Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)