LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control Main Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Installation

  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the switch with the 2 screws.
    2. Connect the connector.
  2. INSTALL STEERING WHEEL ASSEMBLY 
  3. INSTALL STEERING PAD ASSEMBLY 
  4. INSTALL NO. 2 STEERING WHEEL COVER LOWER 
  5. INSTALL NO. 3 STEERING WHEEL COVER LOWER 
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  8. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals