LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Key Cancel Switch >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Key Cancel Switch: Inspection

  1. INSPECT KEY CANCEL SWITCH ASSEMBLY 
    1. Measure the resistance of the switch.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed (OFF) 10 kΩ or higher
      1 - 2 Pushed (ON) Below 1 Ω

      If the result is not as specified, replace the switch.

      Fig 1: Identifying Key Cancel Switch Connector Terminal
      G04476172Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals