How To Proceed With Troubleshooting

HINT:

• Use the following procedures to troubleshoot the occupant classification system.
• *: Use the intelligent tester.

1. VEHICLE BROUGHT TO WORKSHOP 
2. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 
3. DTC CHECK (Present and Past DTC)* 
   1. Check for DTCs (see DTC CHECK / CLEAR ).

      Result 

      RESULT CHART
      
      

      Result	Proceed to
      DTC Is output.	A
      DTC Is not output.	B

   B:  GO TO PROBLEM SYMPTOMS TABLE 

   A: GO to Next Step 

4. DTC CHART 
5. REPAIR OR REPLACEMENT 
6. DTC CLEARANCE (Present and Past DTCs)* 
   1. Clear the DTCs (see DTC CHECK / CLEAR ).
7. DTC CHECK (Present and Past DTCs)* 
   1. Check for DTCs (see DTC CHECK / CLEAR ).

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   DTC is not output.	A
   DTC is output.	B

   B: GO to step  5

   A: GO to Next Step 

8. PROBLEM SYMPTOMS SIMULATION 
   1. Check the passenger airbag ON/OFF indicator condition (see DIAGNOSIS SYSTEM ).

      Result 

      RESULT CHART
      
      

      Result	Proceed to
      Passenger airbag ON/OFF indicator is operating normally.	A
      Passenger airbag ON/OFF Indicator (OFF) is not operating normally.	B

   B: GO to step  5

   A: GO to Next Step 

9. CONFIRMATION TEST 

   NEXT: END