Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Apply a light coat of engine oil to the O-ring of the oil control valve.
  
  Fig 1: Applying Light Coat Of Engine Oil To O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed.
3. Connect the oil control valve connector.
Fig 2: Locating Camshaft Timing Oil Control Valve Assembly Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK FOR ENGINE OIL LEAKS
1. Start the engine, and check that there are no oil leaks.
INSTALL NO. 1 ENGINE COVER (see INSTALLATION )