Accelerator Pedal: Installation: Installation
WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ACCELERATOR PEDAL POSITION SENSOR ASSEMBLY NOTE:
- Avoid physical shocks to the accelerator pedal position sensor assembly.
- Do not disassemble the accelerator pedal position sensor assembly.
- Install the accelerator pedal position sensor with the 2 nuts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
- Connect the accelerator pedal position sensor connector.