Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PANEL SWITCH (DISPLAY CHECK MODE)
1. Check the panel switch (Display Check Mode) (see DTC CHECK/CLEAR ).
- NG: REPLACE MULTI-DISPLAY
- OK: GO TO NEXT STEP
CHECK AVC-LAN CIRCUIT
1. See AVC-LAN CIRCUIT .
- NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
- OK: GO TO NEXT STEP

CHECK PANEL SWITCH

Check each panel switch.

Result:

PANEL SWITCH

Result	Proceed to
All switches do not operate	A
Navigation system switches do not operate	B
Air conditioning system switches do not operate	C

A: REPLACE MULTI-DISPLAY
B: REPLACE NAVIGATION ECU
C: GO TO NEXT STEP

CHECK WIRE HARNESS (GATEWAY ECU - AIR CONDITIONING AMPLIFIER)
- NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
- OK: REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY