LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System (2GR-FE)) >> Accelerator Pedal Rod >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Rod: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL ACCELERATOR PEDAL ROD 
    1. Install the accelerator pedal rod with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Locating Accelerator Pedal Rod Bolts
    G05183872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals