On-Vehicle Inspection

WARNING: This page is about a different variant/trim than selected.

CHECK ACCELERATOR PEDAL ROD

Check the voltage.

Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Turn the intelligent tester ON.
Select the menu items: DIAGNOSIS / ENHANCED OBD II / DATA LIST / ALL / ACCEL POS #1, ACCEL POS #2.
Operate the accelerator pedal, and then check that the ACCEL POS #1 and ACCEL POS #2 values are within the specifications.

Fig 1: Connecting Intelligent Tester To DLC3

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard voltage:

ACCEL POS #1

ACCEL POS REFERENCE CHART

Accelerator Pedal Condition	Specified Condition
Released	0.5 to 1.1V
Depressed	2.5 to 4.5 V

ACCEL POS #2

ACCEL POS REFERENCE CHART

Accelerator Pedal Condition	Specified Condition
Released	1.2 to 2.0 V
Depressed	3.4 to 5.0 V

If the result is not as specified, check the accelerator pedal rod, wire harness or ECM.