LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System (2GR-FE)) >> Crankshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Measure the resistance between the terminals.

    Standard resistance 

    TERMINALS SPECIFIED CONDITION CHART

    Temperature Specified Condition
    Cold 1, 630 to 2, 740 Ω
    Hot 2, 065 to 3, 225 Ω
    Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
    G05184268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE: In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

    If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals