Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | P0120 - P0223, P2135 (TP sensor) |
| Either of following conditions (a) or (b) met: | - |
| (a) Following conditions 1 and 2 met: | - |
| 1. ECT and ECT sensor | 20°C (68°F) or more, and sensor does not malfunction (P0115 or P0116) |
| 2. Time after PNP switch turned OFF | 10 seconds or more |
| (b) Following conditions 1 and 2 met: | - |
| 1. ECT and ECT sensor | Less than 20°C (68°F), and sensor malfunction (P0115 or P0116) |
| 2. Time after PNP switch turned OFF | 30 seconds or more |
| Time after ignition switch turned ON | More than 0.5 seconds |