April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL CAMSHAFT POSITION SENSOR
NOTE: Make sure that the O-ring is not cracked or jammed when installing it.
1. Apply a light coat of engine oil to the O-ring of the sensor.
  
  Fig 1: Locating O-Ring Of Camshaft Position Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the sensor with the bolt.
  Torque: 9.0 N*m (90 kgf*cm, 80 in.*lbf)
3. Connect the sensor connector.
INSTALL AIR CLEANER CAP (see INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK FOR ENGINE OIL LEAKAGE
INSTALL NO. 1 ENGINE COVER (see INSTALLATION )

Fig 2: Locating Camshaft Position Sensor Bolt

G04973355

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002