Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS CHART
| Monitor will run whenever these DTCs are not present | P0010, P0020 (OCV Bank 1, 2) P0011 (VVT System 1 - Advance) P0012 (VVT System 1 - Retard) P0021 (VVT System 2 - Advance) P0022 (VVT System 2 - Retard) P0031, P0032, P0051, P0052 (A/F sensor heater - Sensor 1) P0100 - P0103 (MAF meter) P0115 - P0118 (ECT sensor) P0120 - P0223, P2135 (TP sensor) P0125 (Insufficient ECT for closed loop) P0335 (CKP sensor) P0500 (VSS) P2440 (A/R control valve stuck open) P2441 (A/R control valve stuck close) P2444 (AIP stuck ON) P2445 (AIP stuck OFF) |
| Battery voltage | 11 V or more |
| Fuel system status | Closed loop |
| Either of following conditions (a) or (b) is met | - |
| (a) Engine RPM | Less than 1,000 rpm |
| (b) Intake air amount per revolution | 0.26 g/rev. or more |
| Catalyst monitor | Not executed |