LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Sienna CE >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function) >> Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated) >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. RESET POWER WINDOW REGULATOR MOTOR (DRIVER SIDE) 
    1. Reset the power window regulator motor (See CUSTOMIZE PARAMETERS  ).
    2. Check if the power window operate normally.

    OK: END 

    NG: Go to next step. 

  2. CHECK POWER WINDOW REGULATOR W/ MOTOR (DRIVER SIDE) 
    1. Remove the driver side door glass.
    2. Operate the power window regulator via the power window master switch without the door glass being installed.
    3. Check that the power window regulator operates smoothly.

    OK: FRONT DOOR GLASS RUN LH 

    NG: REPLACE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH 

scientia non olet · About LEMON Manuals