Torque Specifications
VANE PUMP
VANE PUMP TORQUE SPECIFICATIONS REFERENCE CHART
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Vane pump rear housing x Vane pump front housing | 22 | 224 | 16 |
| Pressure port union x Vane pump front housing | 69 | 704 | 51 |
| Power steering fluid pressure switch x Vane pump assembly | 21 | 214 | 16 |
| Power steering suction port union x Vane pump assembly | 12 | 122 | 9 |
| Vane pump assembly set bolts | 29 (43) | 294 (439) | 21 (32) |
| Pressure feed tube assembly x Vane pump assembly (union bolt) | 50 | 510 | 37 |
| Front wheel RH set nuts | 103 | 1050 | 76 |
( ): For use without SST
POWER STEERING GEAR
POWER STEERING GEAR TORQUE SPECIFICATIONS REFERENCE CHART
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Control valve housing set bolt | 18 | 184 | 13 |
| Control valve shaft lock nut | 25 | 250 | 18 |
| Rack housing cap | 59 | 597 | 43 |
| Rack guide spring cap lock nut | 48 (68.5) | 489 (699) | 35(51) |
| Rack x Rack end sub-assembly | 58.5 (83.5) | 597(851) | 43 (62) |
| Tie rod assembly lock nut | 74 | 755 | 55 |
| Turn pressure tube union nut | 11.5(12.5) | 117 (127) | 8(9) |
| Return tube No.2 | 22.5 (24.5) | 229 (250) | 17(18) |
| Steering gear assembly set bolt | 70 | 714 | 52 |
| Pressure feed tube assembly union nut | 22.5 (24.5) | 229 (250) | 17(18) |
| Pressure feed tube clamp set bolt | 9.8 | 100 | 87 in.*lbf |
| Pressure feed tube clamp set nut | 9.8 | 100 | 87 in.*lbf |
| Stabilizer bracket No.1 x Suspension crossmember | 17 | 173 | 12 |
| Intermediate shaft assembly x Steering gear assembly | 36 | 367 | 27 |
( ): For use without SST