Window Defogger System: Repair

Clean the broken wire tips with grease, wax and silicone remover.
Place the masking tape along the both sides of the wire.
Thoroughly mix the repair agent (DuPont paste No. 4817).

Fig 1: Identifying Repair Point, Masking Tape And Broken Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Using a fine tip brush, apply a small amount of the agent to the wire.
After a few minutes, remove the masking tape.
NOTE: Do not repair the defogger wire again for at least 24 hours.

Fig 2: Applying Small Amount Of Agent To Wire Using Fine Tip Brush
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002