Typical Enabling Conditions
Fuel-trim:
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever these DTCs are not present | P0010, P0020 (VVT VSV1, 2), P0011, P0012 (VVT System-Advance, Retard), P0021, P0022 (VVT System 2-Adavance, Retard), P0031, P0032, P0051, P0052 (A/F Sensor Heater Sensor 1), P0100, P0101, P0102, P0103 (MAF Sensor), P0115, P0116, P0117, P0118 (ECT Sensor), P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (TP Sensor), P0125 (Insufficient ECT for Closed Loop), P0335 (CKP Sensor), P0340 (CMP Sensor), P0351, P0352, P0353, P0354, P0356 (Ignitor), P0500 (VSS) |
| Fuel system status | Closed-loop |
| Battery voltage | 11V or more |
| Either of the following conditions is met | Condition 1 or 2 |
| 1. Engine RPM | Less than 1100 rpm |
| 2. Intake air amount per revolution | 0.22 g/rev or more |
| Catalyst monitor | Not executed |