Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation: ECM: Installation

INSTALL ECM
1. Install the ECM with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the 5 ECM connectors.
  
  Fig 1: Locating Nuts And ECM
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ECM (with 10 speakers system)
1. Install the ECM and stereo components amplifier with the 4 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the 5 ECM connectors and 2 stereo components amplifier connectors.
  
  Fig 2: Connecting ECM Connectors And Stereo Components Amplifier Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 INSTRUMENT PANEL BOX
1. Install the No. 2 instrument panel box.
  
  Fig 3: Locating Claws And Clips On Instrument Panel Box No.2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
1. Install the glove compartment door sub-assembly frontward to install it.
  
  Fig 4: Installing Glove Compartment Door Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push the right side wall and then push the left wall to install the stoppers.
PERFORM REGISTRATION
1. When replacing the ECM, perform distance control ECU recognition in ECM (See INSTALLATION ).
  
  Fig 5: Identifying Stoppers Removal Procedure
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002