LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (1GR-FE) - System Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Accelerator Pedal >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal: Installation

  1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY 
    NOTE:
    • Avoid physical shocks to the accelerator pedal rod assembly.
    • Do not disassemble the accelerator pedal rod assembly.
    1. Install the accelerator pedal rod with the 2 nuts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
      Fig 1: Locating Accelerator Pedal Rod Nuts
      G05149572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
scientia non olet · About LEMON Manuals