VVT Sensor: Installation

INSTALL VVT SENSOR (for Bank 2)
1. Apply a light coat of engine oil to the O-ring of the VVT sensor.
2. Install the VVT sensor with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Locating VVT Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the sensor connector.
4. Connect the No. 4 and No. 5 water by-pass hoses.
  
  Fig 2: Locating Water By-Pass Hoses No. 4 And No. 5
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 1)
1. Apply a light coat of engine oil to the O-ring of the sensor.
2. Install the sensor with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 3: Locating VVT Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the sensor connector.
INSTALL AIR CLEANER ASSEMBLY WITH ELEMENT (See INSTALLATION )
INSTALL NO. 2 AIR CLEANER HOSE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSTALL V-BANK COVER (See INSTALLATION )
INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY
1. Install the front wiper motor and link assembly (see INSTALLATION ).
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )