DTC Check/Clear

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
5. Read the DTCs.
  HINT:
  
  Refer to the Techstream operator's article for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
5. Clear the DTCs.
  HINT:
  
  Refer to the Techstream operator's article for further details.