LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE) - DTC P0607 - P2A03, DTC U0101 >> DTC P060D: Internal Control Module Accelerator Pedal Position Performance >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. READ OUTPUT DTC (DTC P060D) 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the tester on.
    4. Clear DTC (See DIAGNOSTIC TROUBLE CODE CHART ).
    5. Turn the ignition switch off and turn the tester off.
    6. Disconnect the tester.
    7. Disconnect the cable from the battery negative (-) terminal and wait for 1 minute.
    8. Connect the cable to the battery negative (-) terminal.
    9. Connect the tester to the DLC3.
    10. Turn the ignition switch on (IG).
    11. Turn the tester on.
    12. Select the following menu items: Powertrain / Engine / Trouble Codes.
    13. Read DTCs.

      Result 

      RESULT CHART

      Result Proceed to
      No output A
      P060D B

    B : REPLACE ECM  (See ECM )

    A : CHECK FOR INTERMITTENT PROBLEMS  (See CHECK FOR INTERMITTENT PROBLEMS )

scientia non olet · About LEMON Manuals