System Description

The throttle actuator is operated by the ECM and opens and closes the throttle valve using the gears. The opening angle of the throttle valve is detected by the Throttle Position (TP) sensor, which is mounted on the throttle body. The TP sensor provides feedback to the ECM. This feedback allows the ECM to appropriately control the throttle actuator and monitor the throttle opening angle as the ECM responds to driver inputs.

HINT:

This ETCS (Electronic Throttle Control System) does not use a throttle cable.

DTC DETECTION CONDITION CHART

DTC No.	DTC Detection Condition	Trouble Area
P2102	Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): Throttle actuator duty ratio 80% or more Throttle actuator current 0.5 A or less	Open in throttle actuator circuit Throttle actuator ECM
P2103	Either of the following conditions is met: Hybrid IC diagnosis signal fails Hybrid IC current limiter port fails	Short in throttle actuator circuit Throttle actuator Throttle valve Throttle body assembly ECM