LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Avalon XLS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Charging System: Generator: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE V-RIBBED BELT  (See REMOVAL )
  4. REMOVE GENERATOR ASSEMBLY 
    1. Disconnect the wire harness clamp.
      Fig 1: Locating Wire Harness Clamp
      G05000433Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the terminal cap.
    3. Remove the nut and disconnect the wire harness from terminal B-
    4. Disconnect the generator connector from the generator assembly.
      Fig 2: Locating Generator Connector To Generator Assembly
      G05000434Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the nut from the cylinder block.
      Fig 3: Locating Cylinder Block Nut
      G05000435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Remove the 2 bolts and generator assembly.
      Fig 4: Locating Generator Assembly Bolts
      G05000436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Remove the bolt and wire harness clamp stay.
      Fig 5: Locating Wire Harness Clamp Stay Bolt
      G04975780Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    8. Remove the bolt and bracket.
      Fig 6: Locating Bolt And Bracket
      G05000438Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals