Circuit Opening Relay: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT CIRCUIT OPENING RELAY
- Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
| Tester Connection |
Specified Condition |
| 1E-7 - 1E-13 |
10 kΩ or higher |
| 1E-7 - 1E-13 |
Below 1 Ω (Battery voltage is applied between terminals 1E-8 and 1D-12) |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002