Service Data

BRAKE CONTROL SERVICE DATA SPECIFICATION CHART

Front speed sensor	for BOSCH	LH	1 (FL+) - 2 (FL-)	Always	0.92 to 1.22 kΩ at 20°C(68°F)
			1 (FL+) - Body ground	Always	10 kΩ or higher
			2 (FL-) - Body ground	Always	10 kΩ or higher
		RH	1 (FR+) - 2 (FR-)	Always	0.92 to 1.22 kΩ at 20°C(68°F)
			1 (FR+) - Body ground	Always	10 kΩ or higher
			2 (FR-) - Body ground	Always	10 kΩ or higher
	for ADVICS	LH	1 (FL+) - 2 (FL-)	Always	1.4 to 1.8 kΩ at 20°C(68°F)
			1 (FL+) - Body ground	Always	10 kΩ or higher
			2 (FL-) - Body ground	Always	10 kΩ or higher
		RH	1 (FR+) - 2 (FR-)	Always	1.4 to 1.8 kΩ at 20°C(68°F)
			1 (FR+) - Body ground	Always	10 kΩ or higher
			2 (FR-) - Body ground	Always	10 kΩ or higher
Skid control sensor	for BOSCH	LH	1 (RR+) - 2 (RR-)	Always	Below 2.2 kΩ
			1 (RR+) - Body ground	Always	10kΩ or higher
			2 (RR-) - Body ground	Always	10 kΩ or higher
		RH	1 (RL+) - 2 (RL-) Below	Always	Below 2.2 kΩ
			1 (RL+) - Body ground 10	Always	10 kΩ or higher
			2 (RL-) - Body ground	Always	10 kΩ or higher
	for ADVICS	LH	2 (RL+) -1 (RL-)	Always	0.9 to 2.1 kΩ
			2 (RL+) - Body ground	Always	10 kΩ or higher
			1 (RL-) - Body ground	Always	10 kΩ or higher
		RH	2 (RR+) -1 (RR-)	Always	0.9 to 2.1 kΩ
			2 (RR+) - Body ground	Always	10 kΩ or higher
			1 (RR-) - Body ground	Always	10kΩ or higher
VSC NO. 1 (Fail Safe) relay			Resistance 3-5	Always	10 kΩ or higher
VSC NO. 1 (Fail Safe) relay			Resistance 3-5	Apply B+ between terminals 1 and 2	Below 1 Ω
VSC NO. 1 relay			Resistance 3-5	Always	10 kΩ or higher
VSC NO. 1 relay			Resistance 3-5	Apply B+ between terminals 1 and 2	Below 1 Ω