Service Data
POWER STEERING FLUID
POWER STEERING - SERVICE DATA SPECIFICATION CHART
| Fluid level rise (Maximum) | 5 mm (0.20 in.) |
|---|---|
| Fluid pressure at idle speed with valve closed | 7,800 to 8,300 kPa (79.5 to 84.6 kgf/cm2 , 1,131 to 1,204 psi) |
| Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position | 7,800 to 8,300 kPa (79.5 to 84.6 kgf/cm2 , 1,131 to 1,204 psi) |
STEERING WHEEL
STEERING WHEEL - SERVICE DATA SPECIFICATION CHART
| Steering effort at idle speed (Reference) | LE Grade, XLE Grade | 6.0 N*m (61 kgf*cm, 53 in.*lbf) |
| SE Grade | 6.8 N*m (69 kgf*cm, 60 in.*lbf) |
VANE PUMP (for 2AZ-FE)
VANE PUMP (FOR 2AZ-FE) - SERVICE DATA SPECIFICATION CHART
| Vane pump shaft and vane pump housing oil clearance (Maximum) | 0.07 mm (0.0028 in.) |
|---|---|
| Vane plate thickness (Standard) | 1.405 to 1.411 mm (0.05531 to 0.05555 in.) |
| Clearance between the rotor groove and plate (Maximum) | 0.03 mm (0.0012 in.) |
| Compression spring free length (Minimum) | 29.2 mm (1.150 in.) |
| Vane pump rotating torque | 0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) |
VANE PUMP (for 2GR-FE)
VANE PUMP (FOR 2GR-FE) - SERVICE DATA SPECIFICATION CHART
| Vane pump shaft and vane pump housing oil clearance (Maximum) | 0.07 mm (0.0028 in.) |
|---|---|
| Vane plate thickness (Standard) | 1.405 to 1.411 mm (0.05531 to 0.05555 in.) |
| Clearance between the rotor groove and plate (Maximum) | 0.03 mm (0.0012 in.) |
| Compression spring free length (Minimum) | 29.2 mm (1.150 in.) |
| Vane pump rotating torque | 0.27 N*m (2.8 kgf*cm, 2.4 in/lbf) |
POWER STEERING LINK
POWER STEERING LINK - SERVICE DATA SPECIFICATION
| Steering rack runout (Maximum) | 0.3 mm (0.0118 in.) |
|---|---|
| Tie rod end sub-assembly stud bolt turning torque | 0.98 to 3.92 N*m (10 to 40 kgf*cm, 8.7 to 34.7 in.*lbf) |
| Total preload (Control valve rotating torque) | 1.5 N*m (15.3 kgf*cm, 13.3 in.*lbf) or less |