LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Corolla CE, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Deceleration Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Deceleration Sensor: Removal

  1. REMOVE FRONT SEAT ASSEMBLY LH  (See REMOVAL )
  2. REMOVE DECELERATION SENSOR BRACKET 
    1. Remove the bolt and upper side deceleration sensor bracket.
      Fig 1: Identifying Deceleration Sensor Bracket Bolt
      G05194997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE DECELERATION SENSOR 
    1. Disconnect the deceleration sensor connector from the deceleration sensor, then remove the 2 bolts and deceleration sensor with the anchor side deceleration sensor bracket.
      Fig 2: Identifying Yaw Rate And Acceleration Sensor Assembly Bolts
      G05194998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals