LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Corolla LE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Lighting System) >> Headlight Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Headlight Assembly: Installation

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEADLIGHT ASSEMBLY 
    1. Connect the connectors.
      Fig 1: Installing Headlight Assembly
      G05132035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the headlight assembly with the 2 bolts, screw and clip.
      Fig 2: Identifying Headlight Assembly With Bolts, Screw And Clip
      G05132017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. INSTALL FRONT BUMPER ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL FRONT FENDER LINER LH (See  INSTALLATION  ) 
  4. INSTALL FRONT FENDER LINER RH (See  INSTALLATION  ) 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight) 
  6. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT (See  ADJUSTMENT   ) 
  7. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) (See  ADJUSTMENT   ) 
  8. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) (See  ADJUSTMENT   ) 
  9. HEADLIGHT AIMING INSPECTION (See  ADJUSTMENT   ) 
  10. HEADLIGHT AIMING ADJUSTMENT (See  ADJUSTMENT   ) 
  11. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (See  ADJUSTMENT   ) 
  12. PREPARATION FOR FOG LIGHT AIMING (See  ADJUSTMENT   ) 
  13. FOG LIGHT AIMING INSPECTION (See  ADJUSTMENT   ) 
  14. FOG LIGHT AIMING ADJUSTMENT (See  ADJUSTMENT   ) 
  15. PERFORM INITIALIZATION (for HID Headlight) 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See CUSTOMIZE PARAMETERS ).
scientia non olet · About LEMON Manuals