Rear Combination Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR COMBINATION LIGHT ASSEMBLY
1. Engage the pin.
  
  Fig 1: Identifying Rear Combination Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the rear combination light assembly with the 4 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 2: Locating Rear Combination Light Assembly And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector and 2 clamps.
  
  Fig 3: Locating Connector And Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002