September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Throttle Body: Inspection
- INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard resistance
STANDARD RESISTANCE
| Tester Connection |
Specified Condition |
| 1 (M-) - 2 (M+) |
0.3 to 100Ω at 20°C(68°F) |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the throttle with motor body assembly.