Stop Light Control Relay
SERVICE DATA SPECIFICATION
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 - 4 | Voltage is not applied between terminals 1 and 2 | Below 1 Ω |
| 3 - 5 | Voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 4 | Voltage is applied between terminals 1 and 2 | Below 1 Ω |
| 3 - 5 | Voltage is applied between terminals 1 and 2 | 10 kΩ or higher |