LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control - Except Hybrid >> VSC Off Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VSC Off Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (See INITIALIZATION )
  2. REMOVE FRONT DOOR SCUFF PLATE  (See REMOVAL )
  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)  (See REMOVAL )
  6. REMOVE VSC OFF SWITCH 
    1. Disengage the 2 claws and remove the VSC off switch.
      Fig 1: Identifying VSC OFF Switch Claws
      G05417866Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals