LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE Except Hybrid) - System Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Accelerator Pedal Rod >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Rod: Installation

  1. INSTALL ACCELERATOR PEDAL ASSEMBLY 
    NOTE:
    • Avoid physical shock to the accelerator pedal assembly.
    • Do not disassemble the accelerator pedal assembly.
    1. Install the accelerator pedal assembly with the 2 nuts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 1: Identifying Accelerator Pedal Assembly Nuts
      G05414035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the accelerator pedal assembly connector.
scientia non olet · About LEMON Manuals