LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Service Specifications - Hybrid) >> Brake Control System >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Brake actuator x No. 1 Brake actuator bracket 9.3 95 82 in.*lbf
Brake actuator x No. 2 Brake actuator bracket 19 194 14
Brake actuator with bracket x Brake actuator bracket 8.0 82 71 in.*lbf
Brake actuator bracket x Body 19 194 14
Brake actuator x Brake line 14 (15) 143 (155) 10 (11)
No. 3 Brake Actuator tube x Brake booster pump 14 (15) 143 (155) 10 (11)
Front speed sensor x Knuckle 8.0 82 71 in.*lbf
Front speed sensor x Body 5.0 51 44 in.*lbf
Front speed sensor x Absorber 19 194 14
Rear speed sensor x Knuckle 8.0 82 71 in.*lbf
Rear speed sensor x Body 5.0 51 44 in.*lbf
Rear speed sensor x Absorber 50 51 44 in.*lbf
Yaw rate and acceleration sensor with bracket x Body 15 153 11
Brake Pedal Stroke Sensor x Brake Pedal 9.3 95 82 in.*lbf
Skid Control ECU x Body 15 153 11
Brake Control Power Supply with bracket x Body 5.0 51 44 in.*lbf
Brake Control Power Supply x Brake Control Power Supply bracket 5.0 51 44 in.*lbf
() For use without union nut wrench