Service Data
WARNING: This page is about a different variant/trim than selected.
Cold tire inflation pressure
SERVICE DATA SPECIFICATION (TIRE AND WHEEL)
| Tire size | Front kPa (kgf/cm2 , psi) | Rear kPa (kgf/cm2 , psi) |
|---|---|---|
| P245/55R19 103S P245/65R17 105S |
230 (2.3, 33) | 230 (2.3, 33) |
| 230 (2.3,33) | 230 (2.3, 33) |
When driving under the above vehicle conditions at sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted by law, inflate the front and rear tires to 240 kPa (2.4 kgf/cm2 , 35 psi) provided that it does not exceed the maximum cold tire inflation pressure molded on the tire side wall.
TIRE RUNOUT SPECIFICATION
| Tire runout | 1.4 mm (0.055 in.) or less |
TIRE RUNOUT SPECIFICATION
| Imbalance after adjustment | 8.0 g (0.018 1b.) or less |